Data Center

Star Real 10 – Cat. 6 / Class EA
R&M has two solutions in its product range for 10 GbE via twisted pair copper cables – one shielded and one unshielded, grouped in the STAR Real 10 range. A channel with STAR Real10 components meets or exceeds the values of the just approved Class EA standard according to ISO/IEC 11 801 ed. 2002 adm.1 and Cat. 6A according to EIA/TIA 568B.2-10.

The requirements of the ISO/IEC 11801 ed. 2002 adm. 1 Class EA are especially demanding. They exceed the channel requirements of EIA/TIA 568B.2-10 Cat. 6A, as well as the requirements of the IEEE 802.3an (10GB/s Ethernet) and ISO/IEC TR 24750.  

Shielded
Each individual Cat. 6 STP module comprises 360° shielding, providing complete protection from interference caused by neighboring modules. It means the critical Alien NEXT para-meter is completely under control.

Unshielded
Our many years of experience with shielded systems provide the basis for the WARP tech-nology (Wave Reduction Patterns) used in the STAR Real 10 UTP range. A foiled conductor encloses the lines and absorbs outside interference. The foil segments in the UTP cable are mutually insulated to prevent circulating currents. They are short enough to avoid antenna effects, but packed closely enough together to suppress Alien NEXT effectively. WARP instal-lation cables remain easy to terminate and can be laid in the same way as conventional UTP cables. Clip-on WARP casings for the connector modules together with optimized patch cables ensure that the protective function remains effective over the entire connection link.

Vision – the fiber optic range
The VISION range enables 10 GbE via fiber optics. It consists of various performance classes corresponding to the different requirements that exist in computer centers. Single-mode OS1 fiber optic as per IEC 11801 2nd Edition or OS2 (mentioned in ISO/IEC 24702 in accordance with the B1.3 fiber optic in IEC 60793-2- 50) is provided for the WAN area of the entrance area. Class OM3 multimode fiber optic has established itself in the backbone area. OM3 is also suitable for Storage Area Networks (SAN), offers maximum performance over distances of 300 meters, and is suitable for redundant networks such as those specified in TIA 942 in Tiers III and IV.

Security system
The operational reliability of computer centers can be enhanced already at the cabling level, at no great cost. Faults caused by human error can be prevented from the outset if the instal-lation offers a high level of clarity, simplicity and usability. Here, a simple yet consistent me-chanical solution can often be more effective than expensive active components or complex software solutions.

R&M’s solution is modular, adaptable and retrofittable. The R&M security system is based on Smartholes, which are integrated as standard in R&M’s platforms for copper and fiber optic connectors. Outlets and patch panels are therefore already prepared for the security instal-lation. The R&M security system consists of three levels:

1. Visual coding 
2. Mechanical and visual coding, and
3. Intelligent protection using lock mechanisms and authorization solutions

The R&M PlugGuard is available at the third level. It protects connectors to active devices (switches, surveillance cameras, etc.) against unauthorized access.